I am having difficulty getting Sentinel ver 6.1 to recognize the dongle
attached to LPT1. The port parameters are:
PCI bus 0, device 31, function 0
ECP Printer Port (LPT1)
Device type: Ports (COM & LPT
Manufacturer: (Standard port types)
Location: on Intel(R) B85 LPC
Controller - 8C50 - this matches the LPT port in Device Manager
If I configure the port
parameters for the PCI bus in Sentinel configuration GUI the
dongle is never detected. If I configure the ECP port to be on
port 378 and ISA bus the dongle is detected regardless of being
plugged in or not - a false positive.
The LPT port is working as I
can attach a printer and it works, ECP mode is set in Bios as
well.
Any ideas would be greatly appreciated.